|
|
Build Your Online Product Catalogs?
| Product Name: |
A-LLM1(TTK) water warning leak ***ection
|
| Supply Ability: |
|
| Related proudcts |
sensor alarm, warning alarm, |
| Specifications |
water leak alarms |
| Price Term: |
EXW |
| Port of loading: |
|
| Minimum Order |
1set |
| Unit Price: |
450usd/set |
|
Product features:
，LED instructions power supply,leakage alarm,sensing cable faults and communication state.
，It can record 32 leakage alarm data records.
，Practical reliable twisted pair serial RS-485 communication mode And as far as communication distance up to 1200 m,programming agreement is the standard of industrial modbus agreement.
，12V DC power supply,no polar access.
，The communication baud rate and address can be set through the test software.
，The SPDT relay¨s output form to often open closed coexist freedom of choice.
，Good ESD,and surge transients immunity technology,guaranteed that the reliable operation of the A-LLM1.
，It is very easy to be install with DIN rail or enclosure.
Basic characteristics
co***tibility
ALLW1000 sensor cable and TraceTek leak ***ectingsenstion cables or the same type sensing cables
Sensor cables maximum length:1500M
Accuracy:Sensor cable¨s length of 0.5%＼0.5m
Environmental rating
Storage temperature ;-40 oC~60 oC(0 oF~140oF)
Operating temperature:-20oC~50 oC(32 oF~122oF)
Operating humidity:5%~95%(No condensation)
Power supply:12VDC,3W
Serial interface Network configuration RS485 communication mode,baud rate can be chosen,optional address for 0 to 247,the factory default baud is 9600,and addresss is 0
Programming agreement :MODBUS RTU
Relay contacts:AC125V,0.5A,DC24V,1A.
To often open, closed can be chosen Installing the A-LLM1
Note:To avoid damage to the A-LLM1,store the unit int it's packaging until ready to install.
Selecting the mountion position
Chosse a location where the module will be protected from the elements,temperature extremes or heavy vibration.The ALLM1 is designed to be snapped onto standard 35 mm DIN rail. Existing electrical or instrumentation cabinets with ***re rail ***ce make good mounting locations. It is also possible to install a small section of DIN rail directly on a wall or cabinet surface and monut the -LLM1 in any location as long as it does not c |
| Company: |
Shenzhen An Ying Technology Co.,Ltd
|
| Contact: |
Ms. Liu Katherine |
| Address: |
4F,JINXICHENG BLD,BUJIUWO,DALANG,LONGHUA,BAO'AN,SHENZHEN |
| Postcode: |
518109 |
| Tel: |
86 75 28187781 |
| Fax: |
86 75 28187783 |
| E-mail: |
|
|
|
|
Home
